| |
| This section contains a wide variety of relief valves suitable for most applications, with flows up to 380 litres/min (100 US GPM) and pressures up to 400 bar (5800 psi). Valves available include direct acting, poppet type reliefs suitable for safety and fast acting requirements and pilot operated valves giving good, accurate control over widely varying flows. |
 |
|
  |
|
| |
| This section includes three main types of dual relief valve:
1) Differential area/direct acting poppet type including single or dual cartridge versions.
2) Direct acting with make up checks.
3) Pilot type with vent feature and make up checks.
Flows up to 380 litres/min (100 US GPM) and pressures up to 350 bar (5000 psi). |
 |
|
| |
|
| |
| Sequence valves are similar to relief valves but with their spring chamber referenced to a separate drain port. Direct acting and pilot operated versions with and without free flow checks are available in this section, with flows up to 200 litres/min (52 US GPM) and pressures up to 350 bar (5000 psi). |
 |
|
| |
|
| |
| This section contains pressure control valves which limit the downstream pressure to a set level. Direct acting and pilot operated versions with and without reverse reliefs are available. Flows up to 200 litres/min (52 US GPM) and pressures up to 350 bar (5000 psi). |
 |
|
| |
|
| |
| 300L/min, 400 bar (80 US GPM, 5800psi) Single & Dual Overcentre . Load Holding . Motion Control
A comprehensive range of valves generally recognised as being the best in the world. Our simple design provides greater stability and secure load holding leading to superior operator control and safety. |
 |
|
| |
|
| |
| Our compact BoomLoc valves are designed for compliance with the ISO 8643 standard for material handling on backhoes and excavators. These tried and tested valves provide the ultimate in smooth control and are the result of long research and development coupled with customer feedback. |
 |
|
| |
|
| |
| This section contains check valves of sizes up to 1 1/4” BSP and cracking pressure from 0.5 to 7.0 bar. Also included in this section are hose rupture valves of sizes up to 3/4” BSP and pilot check valves with flow ranges up to 300 litres/min (80 US GPM). These are available in cartridge, insert or body form. |
 |
|
| |
|
| |
| This section contains a wide range of needle and restrictor valves - both cartridge and line mounted versions with port sizes to 3/4” BSP and nominal flow rates up to 85 litres/min (22 US GPM) and working pressures up to 350 bar (5000 psi). |
 |
|
| |
|
| |
| This section contains a selection of pressure compensated flow regulators, both line mounted and cartridge style. There are three main types:
1) Restrictive style 2) Bypass style 3) Priority style
Regulated flows up to 350 litres/min (92 US GPM) and pressures up to 350 bar (5000 psi) |
 |
|
| |
|
| |
| This section contains flow dividers/combiners with flow ratings up to 220 litres/min (60 US GPM) and pressures up to 280 bar (4000 psi).
Ideal for use in systems where actuators are not mechanically linked and in transmission systems as difflock valves. |
 |
|
| |
|
| |
| 100 L/min, 250 bar (26 US GPM, 3600 psi) Solenoid Operated Poppet . Spool . 2/2 . 3/2 . 4/2 . 4/3
High performance conventional and proportional valves requiring minimal solenoid power and producing low pressure drops, with little hysteresis and fast switching, our directional valves give cost effective, efficient, high speed and reliable operation. Also flexible and innovative design and development for special applications. |
 |
|
| |
|
| |
| This section contains a range of pump unloading valves both cartridge and bodied versions. Flows up to 200 litres/min (52 US GPM) and pressures up to 350 bar (5000 psi). The bodied valves contain check valves and an internal pilot. Ideal for accumulator systems. |
 |
|
| |
|
| |
| This section contains a wide range of shuttle valves which are ideal for brake circuits and pilot logic circuits. Also included are remote sequence cartridges which can be used for unloading or sequencing small flows.
Pressures up to 350 bar (5000 psi) and flows up to 30 litres/min (8 US GPM).
Hot oil shuttle integrated circuits are also included, with pressures up to 350 bar (5000 psi) and flows up to 120 litres/min (32 US GPM). |
 |
|
| |
|
| |
| 100 L/min, 350 bar (26 US GPM, 5000psi) CETOP 02, 03 & 05 Directional & Stacking Valves
A comprehensive range of directional, flow, pressure and check valve functions packaged as Cetop stacking valve modules using cartridge technology to improve serviceability. |
 |
|
| |
|
| |
| 150 L/min, 350 bar (40 US GPM, 5650psi) Single & Dual Overcentre and Relief
Direct motor mounted valves providing the control where most needed in a compact cost effective package. |
 |
|
| |
|
| |
| Screw-in cartridge valve technology enables us to concentrate any number of hydraulic control functions into a single block, from a single valve controlling the descent of a cylinder to an elaborate block controlling all the operations of a machine. Benefiting you with improved performance:-
Greater functionality for the same price as alternative methods.
Simplified product development due to the adaptability of cartridge valve technology.
Wide standard range, all functions can be sourced from us ensuring compatibility.
Fewer pipework connections eliminate potential leak paths and power sapping hydraulic fittings.
In service - painless testing and maintenance.
And reduced costs:-
The valves themselves are more economical to make.
Installation can be considerably quicker, offering “plug & play” potential with the system being assembled and tested prior to delivery, requiring less supporting bracketry and fewer pipework fittings. |
 |
|
| |
|
| |
| Cavity drawings for our complete range of cartridges may be downloaded in both PDF and DXF formats. Includes cross reference of cartridge to cavity. |
 |
|
| |
|
| |
| A range of valves utilising our advanced technology in cartridges that fit alternative cavities. The range centres on our unique series of motion control valves supported by pressure, flow, directional and check functions. |
 |
|
| |
|
